manualshive.com logo in svg

Gigabyte G291-2G0, Service Manual, Page: 58 / 139

Share
Download
Gigabyte G291-2G0 Service Manual Download Page 58

BIOS Setup

- 58 -

  Project Name

 

Displays the project name information.

  Project Version

 

Displays version number of the BIOS setup utility.

  Build Date and Time

 Displays the date and time when the BIOS setup utility was created.

  BMC Information

(Note)

  BMC Firmware Version

(Note)

 

Displays BMC firmware version information.

  Processor Information 

  CPU Brand String/Max CPU Speed/CPU Signature/Processors Core/Microcode Patch 

 

Displays the technical specifications for the installed processor.

  Platform Information
  Processor/PCH/RC Revision

 

Displays the information for the installed platform.

 

 

Memory Information

  Total Memory

(Note)

 

Displays the total memory size of the installed memory.

  Memory Frequency

(Note)

 

Displays the frequency information of the installed memory.  

  Onboard LAN Information

Summary of Contents for G291-2G0












































































































































Reviews:

No comments