manualshive.com logo in svg

Gigabyte G291-2G0, Service Manual, Page: 120 / 139

Share
Download
Gigabyte G291-2G0 Service Manual Download Page 120

BIOS Setup

- 120 -

5-4-3 

BMC Network Configuration

 

 Select NCSI and Dedicated LAN  

 

 

Switch NCSI and dedicated LAN and send KCS command.

 

Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3 (Failover).

 

Default setting is 

Mode1 (Dedicated)

.

  

Lan Channel 1 

  

  

Configuration Address source

 

Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option will not 

modify any BMC network parameters during BIOS phase.

 

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting is 

DynamicBmcDhcp

.

  

Station IP address 

  

 

Displays IP Address information.

  

Subnet mask

   

 

Displays Subnet Mask information.

 

Please note that the IP address must be in three digitals, for example, 192.168.000.001.

  

Router IP address

   

 

Displays the Router IP Address information. 

  

Station MAC address

   

 

Displays the MAC Address information. 

  

Real-time synchronize BMC network parameter values

   

 

Press [Enter] to synchronize the BMC network parameter values. 

Summary of Contents for G291-2G0












































































































































Reviews:

No comments