manualshive.com logo in svg

Gigabyte G291-2G0, Service Manual, Page: 116 / 139

Share
Download
Gigabyte G291-2G0 Service Manual Download Page 116

BIOS Setup

- 116 -

5-4  Server Management Menu

  FRB-2 Timer

 

Enable/Disable FRB-2 timer (POST timer).

 

Options available: Enabled/Disabled. Default setting is 

Disabled

.

  FRB-2 Timer timeout

 

Configure the FRB2 Timer timeout.

 

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is 

6 minutes

.

 

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

  FRB-2 Timer Policy

 

Configure the FRB2 Timer policy.

 

Options available: Do Nothing/Reset/Power Down. Default setting is 

Do Nothing

.

 

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

  OS Watchdog Timer 

 

Enable/Disable OS Watchdog Timer function.

 

Options available: Enabled/Disabled. Default setting is 

Disabled

.

  OS Wtd Timer Timeout

 

Configure OS Watchdog Timer.

 

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is 

10 minutes

.

 

Please note that this item is configurable when OS Watchdog Timer is set to Enabled.

  OS Wtd Timer Policy

 

Configure OS Watchdog Timer Policy.

 

Options available: Reset/Do Nothing/Power Down. Default setting is 

Reset

.

 

Please note that this item is configurable when OS Watchdog Timer is set to Enabled.

Summary of Contents for G291-2G0












































































































































Reviews:

No comments