Giga-tronics 8650A Series, Operation Manual

Page: 45 / 240

Front Panel Operation
Manual 31470, Rev. E, April 2001 2-13
4. Move the cursor along the slope of any curve to display, below the graph, the cursor position, the
power level and the corresponding percentage of time the signal is above or below that level.
Sto/Rcl
Up to 20 setup configurations can be stored in and recalled from non-volatile memory.
Recall:
1. From the Setup Menu press [ Sto/Rcl ].
2. Select [ Recall ] to recall a previously stored setup.
3. Step through the stored setup addresses with the cursor keys until the setup to recall is
displayed.
4. Press [ OK ] to recall the selected setup.
5. Press [ Recall Preset ] to recall the default setup for the connected sensors.
Store:
1. To store the current configuration, press [ Sto/Rcl ] from the Setup Menu.
2. Select [ Store ] to store the current setup.
3. Select the setup ID (1 through 20) that you want to assign to this setup.
Figure 2-9: Illustration of the CDF Curve
Figure 2-10: Illustration of the CCDF Curve
Line 1 (A) CDF
Vert
Horiz
Zoom
In
Zoom
Out
Exit
Cursor: - 46.32 dBm 44.05%
100%
-48.62 dBm -43.62 dBm
CAL ON
Interval: 1 min (sampling complete)
0%
Select
Mode
Reset
Line 1 (A) CCDF
Vert
Horiz
Zoom
In
Zoom
Out
Exit
Cursor: - 64.90 dBm 46.32%
100%
-48.62 dBm -42.62 dBm
CAL ON
Interval: 1 min (sampling complete)
0%
Select
Mode
Reset