manualshive.com logo in svg

Giga-tronics 8003, Operation Manual

The Petzl 8003 user manual is essential for getting the most out of this top-of-the-line product. With just a few clicks, you can conveniently download this detailed manual for free from our website. Find everything you need to know about operating and maintaining your Petzl 8003 with ease.

Share
Download
background image

Operation

Manual 20791, Rev. C, June 2001

2-63

The [

DONE

] softkey at the bottom of the menu terminates the setting of the clock. The clock 

will start running from the time and date settings that appear at the time this softkey is pressed. 
The routine will then return to the SET TIME menu (SY1-13).

When the [

SET TIME

] softkey is displayed, it will only be possible to leave the menu and 

return to regular data display by pressing the DONE softkey.

[

TEST PATTERN]

Menu SY1-13:

 Displays various test patterns. The patterns will provide helpful feedback when 

making adjustments to the display hardware. The data display will be replaced with a test grid, 
and the softkey menu will change to SY1-16.

When the TEST PATTERN softkey menu is displayed, it will be possible to only leave the 
menu and return to regular data display by pressing the DONE softkey.

Whatever softkey label is currently associated with the display pattern being shown will be in 
light blue. All other labels will be in standard menu green. If a front panel key is pressed, the 
screen will display the name of the key.

[

GRID L/S] and [DOTS L/S]

Menu SY1-16:

 Replaces the entire display with the indicated display pattern. A prompt on 

the screen will be shown indicating that any key can be pressed to return to the menu. When 
the key is pressed, the routine will return to the TEST PATTERN menu (SY1-13) with the 
exception that the indicated pattern will continue to occupy the data display area.

[

COLOR BARS]

Menu SY1-16:

 Replaces the data display area with a standard NTSC color bar display.

[

CIRCLES and 1 COLOR]

Menu SY1-16:

 Selects displays which can be used for making adjustments to the video circuits 

of the 8003.

[

CHANGE COLOR]

Menu SY1-16:

 Changes the color of the pattern being displayed. When the 

[

TEST PATTERN

] softkey in the Service Menu is pressed and the Test Pattern menu entered, 

the test grid will be light blue. Changes in color will be cycled in the following order: Red, Yel-
low, Green, Light Blue, Dark Blue, Magenta, and White.

[

DONE]

Menu SY1-16:

 Terminates the display of test patterns. The routine will return to the Test Pat-

tern menu (SY1-13).

[

SENSOR EEPROM]

Menu SY1-13:

 Enters the routines necessary to either view or change the calibration data for 

the power sensors and/or bridges connected to the 8003.

Summary of Contents for 8003



































































































































































































































































Reviews:

No comments

Related manuals for 8003

Van Walt GA5000 Quick Start Manual preview
GA5000
Brand: Van Walt Pages: 2
DayTronic 4030 Instruction Manual preview
4030
Brand: DayTronic Pages: 54
Bacharach MGD-100 Quick Installation Manual preview
MGD-100
Brand: Bacharach Pages: 2
Bachmann RPT114 Owner'S Manual preview
RPT114
Brand: Bachmann Pages: 33
Datalogic Smart-VS Quick Reference Manual preview
Smart-VS
Brand: Datalogic Pages: 6
Datakom DKM-411 Quick Start Manual preview
DKM-411
Brand: Datakom Pages: 4
Datakom DKM-407 User Manual preview
DKM-407
Brand: Datakom Pages: 38
Gardner Bender PM3000 Operating Instructions preview
PM3000
Brand: Gardner Bender Pages: 4
GAPS Clack WS1 Installation, Operation And Maintenance Manual preview
Clack WS1
Brand: GAPS Pages: 36
yellow jacket 68940 Operation Manual preview
68940
Brand: yellow jacket Pages: 26
K-Patents PR-33-S Troubleshooting Manual preview
PR-33-S
Brand: K-Patents Pages: 10
Landis+Gyr ULTRAHEAT T230 Manual preview
ULTRAHEAT T230
Brand: Landis+Gyr Pages: 26
Landis+Gyr Ultracold T550 Operating Instructions preview
Ultracold T550
Brand: Landis+Gyr Pages: 3
Hanna Instruments HI 701 Quick Start Manual preview
HI 701
Brand: Hanna Instruments Pages: 2
Olimpus IPLEX RT Operation Manual preview
IPLEX RT
Brand: Olimpus Pages: 12
Ametek Universal Analyzers 275E Instruction Manual preview
Universal Analyzers 275E
Brand: Ametek Pages: 34
Topcon IM-600 Instruction Manual preview
IM-600
Brand: Topcon Pages: 59
Rae NeutronRAE II User Manual preview
NeutronRAE II
Brand: Rae Pages: 38

Brands by name

Popular brands

Load more brands