Modulation Operation
Giga-tronics 2500B Series Microwave Signal Generators
Page 60
Operation Manual, Part Number 34737, Rev C, June 30, 2011
PM Menus
Submenu
Parameter
PM Int Gated Menu,
continued
Synch Out Delay
Determines the amount of delay that occurs between the leading
edge of the pulse video and the leading edge of the sync pulse at the PM SYNC OUT
connector.
NOTE:
The same sync out delay parameter setting gets used for all three internal pulse
modulation modes (continuous, triggered, and gated); it is not set and stored
separately for each of these modes.
Trigger In
Determines the polarity of the TTL level at the PULSE IN/PM TRIG IN
connector that is the active gating condition for a pulse modulated RF output. The
available selections are as follows:
Active High
Active Low
