GIGA-BYTE TECHNOLOGY G191-H44 Service Manual Download Page 98

Page: 98 / 114

BIOS Setup

- 98 -

There are two types of passwords that you can set:

•

Administrator Password

Entering this password will allow the user to access and change all settings in the Setup Utility.

•

User Password

Entering this password will restrict a user’s access to the Setup menus. To enable or disable

this field, a Administrator Password must first be set. A user can only access and modify the

System Time, System Date, and Set User Password fields.

5-5 Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up
access passwords.

Parameter

Description

Administrator Password

Press [Enter] to configure the administrator password.

User Password

Press [Enter] to configure the user password.

Secure Boot

Press [Enter] to configure advanced items.

Summary of Contents for G191-H44



















































































































Search results

Summary of Contents for G191-H44

Reviews:

Related manuals for G191-H44

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY G191-H44, Service Manual

Search results

Summary of Contents for G191-H44

Reviews:

Related manuals for G191-H44

Brands by name

Popular brands