GIGA-BYTE TECHNOLOGY G191-H44, Service Manual

Page: 77 / 114

- 77 - BIOS Setup
Parameter
Description
Interleave NVDIMMs
Controls if NVDIMMs are interleaved together or not.
Options available: Enable/Disable. Default setting is
Disable .
Assert ADR on Reset
Enable/Disable Assert ADR on Reset.
Options available: Enable/Disable. Default setting is
Disable .
Assert ADR on S5
Enable/Disable Assert ADR on S5.
Options available: Enable/Disable. Default setting is
Disable .
Memory Topology
Press [Enter] to configure advanced items.
Memory Map
Press [Enter] to configure advanced items.
Š
IMC Interleaving
– Select to configure IMC Interleaving.
– Options available: Auto/1-way Interleave/2-way Interlave.
Default setting is Auto .
Memory RAS Configuration
Press [Enter] to configure advanced items.
Š
RAS Type
– Displays the RAS type.
Š
Static Virtual Lockstep Mode
– Enable/Disable the Static Virtual Lockstep mode.
– Options available: Disable/Enable. Default setting is Disable .
Š
Mirror Mode
– Mirror Mode will set entire 1LM/2LM memory in system to be
mirrored, consequently reducing the memory capacity by half.
Enables the Mirror Mode will disable the XPT Prefetch.
– Options available: Disable/Mirror Mode 1LM/Mirror Mode 2LM.
Default setting is Disable .
Š
Memory Rank Sparing
– Enable/Disable Memory Rank Sparing.
– Options available: Disable/Enable. Default setting is Disable .
Š
Correctable Error Threshold
– Correctable Error Threshold (1-32767) used for sparing,
tagging, and leaky bucket.
– Press the <+> / <-> keys to increase or decrease the desired
values.
Š
SDDC Plus One
– Enable/Disable SDDC Plus One.
– Options available: Disable/Enable. Default setting is Disable .