GIGA-BYTE TECHNOLOGY G191-H44 Service Manual Download Page 58

Page: 58 / 114

BIOS Setup

- 58 -

5-2-7 LSI SAS3 MPT Controller SAS3008

Parameter

Description

LSI SAS3 MPT Controller Version

Press [Enter] to configure advanced items.

Controller Management

– View Controller Properties

▪

Press [Enter] to view detailed information.

– Change Controller Properties

▪

Rebuild Rate: Select to change Rebuild Rate.

▪

Legacy BIOS: Enable/Disable Legacy BIOS.

▪

Apply Changes

– Save Controller Events

▪

Available File Systems: Select to choose an available File
System.

▪

Available Directories: Select to choose an available
Directories.

▪

Enter File Name: Allows to enter File Name.

▪

Save Events

– Advanced Controller Properties

▪ Port Configuration: Allows the logical grouping of the

controller phys into one or more ports.

▪ Report Device Missing Delay Timer: Allows to configure

Report Device Missing Delay Timer.

▪ Report I/O Missing Delay Timer: Allows to configure

Report I/O Missing Delay Timer.

▪

Apply Changes

Summary of Contents for G191-H44



















































































































Search results

Summary of Contents for G191-H44

Reviews:

Related manuals for G191-H44

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY G191-H44, Service Manual

Search results

Summary of Contents for G191-H44

Reviews:

Related manuals for G191-H44

Brands by name

Popular brands