GIGA-BYTE TECHNOLOGY G191-H44, Service Manual

Page: 62 / 114

BIOS Setup - 62 -
Parameter
Description
COM1/COM2 Serial LAN/
Legacy/Serial Port for Out-
of-Band EMS Console
Redirection Settings
(continued)
Š
Legacy OS Redirection Resolution
(Note)
– Specifies the number of Rows and Columns supported for the
Legacy OS redirection.
– Options available: 80x24/80x25. Default setting is 80x24 .
Š
Putty KeyPad
(Note)
– Selects FunctionKey and KeyPad on Putty.
– Options available: T100/LINUX/XTERMR6/SCO/ESCN/VT400.
Default setting is VT100 .
Š
Redirection After BIOS POST
(Note)
– This item allows user to enable console redirection after OS has
loaded.
– Options available: Always Enable/Boot Loader. Default setting is
Always Enable .
Š
Legacy Console Redirection Settings
– Selects a COM port to display redirection of Legacy OS and
Legacy OPROM Messages.
– Options available: COM1/COM2 Serial Over LAN. Default setting
is COM1 .
Š
Out-of-Band Mgmt Port
– Microsoft Windows Emergency Management Service (EMS) allows
for remote management of a Windows Server OS through a serial
port.
– Options available: COM1/COM2 Serial Over LAN. Default setting
is COM1 .
(Note) Advanced items prompt when this item is defined.