GIGA-BYTE TECHNOLOGY G191-H44 Service Manual Download Page 66

Page: 66 / 114

BIOS Setup

- 66 -

5-2-12

Network Stack Configuration

(Note) This item appears when

Network Stack

is set to

Enabled

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled/Disabled. Default setting is

Enabled

Ipv4 PXE Support

(Note)

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/Disabled. Default setting is

Enabled

Ipv4 HTTP Support

(Note)

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/Disabled. Default setting is

Disabled

Ipv6 PXE Support

(Note)

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/Disabled. Default setting is

Disabled

Ipv6 HTTP Support

(Note)

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/Disabled. Default setting is

Disabled

PXE boot wait time

(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

Summary of Contents for G191-H44



















































































































Search results

Summary of Contents for G191-H44

Reviews:

Related manuals for G191-H44

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY G191-H44, Service Manual

Search results

Summary of Contents for G191-H44

Reviews:

Related manuals for G191-H44

Brands by name

Popular brands