39
DPT260
The bollard does
not work or shows
random
operations. (C011)
• The electrical guard switch of the
control unit is in OFF position.
• The protection fuses of the
master board are burned.
• The master board is broken and
it must be replaced.
• Reset the electrical guard switch in ON position and
check that it remains in this position.
• Check the 7 fuses of the master board and if it is
necessary replace the burned ones with some others
with the same values as reported on the printed circuit
(ex. T1A).
• Replace the master board. Consult the chapter 10:
SPECIFIC OPERATIONS.
UK
EC Declaration of conformity
The manufacturer:
GI.BI.DI.
Via Abetone Brennero, 177/B,
46025 Poggio Rusco (MN) - ITALY
declares that the products:
AUTOMATIC BOLLARDS DPT260
are in conformity to the following EEC Directives:
•
and that the following harmonised standards have been applie:
•
•
Date 10/01/2020
S.r.l.
Directive LVD 2006/95/CE and subsequent amendments
;
•
;
Directive EMC 2004/108/CE and subsequent amendments
EN60335-1,
EN61000-6-1, EN61000-6-3
The legal Representative
Michele Prandi
Moreover declares that the product must not be used until the machine in
which it has been incorporated has not been declared in accordance with
2006/42/CE Directive.
