GHM Delta OHM HD50 Series, Operating Manual

Page: 11 / 54

HD50
- 11 -
V1.5
5 WEB SERVER
The data logger has an integrated web server through which you can configure the data
logger and view the real time measurements from any PC, tablet or smartphone con-
nected to the same local network of the data logger by simply using a web browser.
To connect to the web server, type the IP address of the data logger in the address
bar of the web browser of your device (PC, tablet, smartphone, …).
Note : the data loggers with LCD display the IP address (see pag. 5); for the data loggers
without LCD, the IP address can be displayed on the PC by using the HDServer1 soft-
ware, which can automatically detect the data loggers connected to the network.
Note
: if a port number other than the standard HTTP (80) has been set in the data
logger, the port number must be specified after the IP address (
IPaddress:port num-
ber
).
In the web server starting window, enter the user name and the password supplied
with the data logger, then press
Submit
.
Structure of the web server menu:
SETTINGS
INFO Data logger general information
CONFIGURATION Modbus address, user code and belonging group
MEASURES Selection of the quantities to be displayed
LOGGING Logging settings
ALARMS Alarm thresholds and hysteresis
UNITS Units of measurement
CHANNELS/INPUTS Selection of the quantities to be displayed with the Monitor function (ex-
cept HD50GH ) or configuration of the input channels (only HD50GH)
MONITOR
MEASURES Display of the real time measurements
CHART Graphs of the measurements acquired by the Monitor function
SETUP Settings of the graphs of the measurements
TABLE Numeric table of the measurements acquired by the Monitor function
CONNECTIVITY
NETWORK LAN/WLAN settings(Wi-Fi or Ethernet choice, IP address, etc.)
WIFI List of the Wi-Fi networks to which the data logger connects
EMAIL Settings for sending e-mails
FTP Settings for sending data via FTP
CLOUD Settings for sending data to the Cloud
SERVER Settings for the connection with the HDServer1 software
CLOCK Setting of the automatic clock synchronization
FILES
LOAD Import of data files
CHART Graphs of imported measurements
SETUP Settings of the graphs of imported measurements
TABLE Numeric table of imported measurements