HD50
- 45 -
V1.5
9
INSTRUMENT STORAGE
Conditions for storage of the instrument:
•
Temperature: -20...+70 °C.
•
Humidity: below 90 %RH no condensation.
•
When storing, avoid places where:
•
humidity is high;
•
instrument is exposed to direct solar radiation;
•
instrument is exposed to high temperature source;
•
there are strong vibrations;
•
there is vapor, salt and/or corrosive gas.
10
SAFETY INSTRUCTIONS
General safety instructions
The instrument has been manufactured and tested in compliance with the safety stand-
ard EN61010-1:2010 “Safety requirements for electrical equipment for measurement,
control and laboratory use” and left the factory in a safe and secure technical condition.
The proper operation and the operational safety of the instrument can be ensured on-
ly if all the regular security measures are observed as well as the specific measures
described in this operating manual.
The proper operation and the operational safety of the instrument can be ensured on-
ly under the climatic conditions specified in this manual.
Do not use the instrument in places where there are:
•
Rapid ambient temperature variations that may cause condensation.
•
Corrosive or flammable gases.
•
Direct vibrations, shocks to the instrument.
•
High-intensity electromagnetic fields, static electricity.
If the instrument is moved from a cold environment to a hot one or vice versa, the
formation of condensation might cause problems to its operation. In this case you
need to wait for the instrument temperature to reach ambient temperature before op-
eration.
User obligations
The user of the instrument must make sure that the following regulations and direc-
tives related to the handling of hazardous materials are fulfilled:
•
European directives on safety and health at work.
•
National regulations on safety and health at work.
•
Accident prevention regulations.
Summary of Contents for Delta OHM HD50 Series
Page 51: ......
