GHM Delta OHM HD50 Series, Operating Manual

Page: 16 / 54

HD50
- 16 -
V1.5
•
INPUTS panel (present only in HD50GH model)
Allows configuring the inputs of the HD50GH model. For each of the four inputs (Input
1, Input 2, Input 3, Input 4) select the input type.
The available input types are:
•
Temperature PT100 …
: Pt100 sensor (2W=2 wires, 3W=3 wires, 4W=4 wires)
•
Temperature PT1000 … : Pt1000 sensor (2W=2 wires, 3W=3 wires, 4W=4 wires)
•
Temperature TC …
: thermocouple (K, J, T, N, R, S, B or E type)
•
Voltage 0-1V : 0…1 V voltage input
•
Voltage 0-50mV
: 0…50 mV voltage input
•
Current 4-20mA : 4…20 mA current input
•
Potentiometer
: potentiometric input
•
Mapped Voltage 0-1V
: 0…1 V voltage input with associated physical quantity
•
Mapped Voltage 0-50mV : 0…50 mV voltage input with associated physical quantity
•
Mapped Current 4-20mA
: 4…20 mA current input with associated physical quantity
•
Mapped Potentiometer : potentiometric input with associated physical quantity
•
Voltage 0-10V
: 0…10 V voltage input
•
Mapped Voltage 0-10V : 0…10 V voltage input with associated physical quantity
•
Voltage -50-50mV
: -50…50 mV voltage input
•
Mapped Voltage -50-50mV : -50…50 mV voltage input with associated physical quan-
tity
If the input is not used, select
Not Defined
(last option of the list).
Note : select Current 4-20mA or Mapped Current 4-20mA also for 0…20 mA input signals.
Press “ Apply ” to send the
changes to the data logger
Button to refresh
the settings
Selection of the
input type