+GF+ MSA 2 MULTI, Instruction Manual

Page: 19 / 64

Operating Instructions MSA 2 MULTI Fusion process
17
2.8.2 Cooling time
After the completion of the process, the fusion summary and the
remaining cooling time, if defined in the barcode, are displayed
alternately. Messages are active till the user will press the
STOP/ESC (O) button, to proceed with the next welding.

= 40’
N 150
Remove the external clamp only when the cooling time is
expired!
The fitting area is hot! Pay attention during the removal of the
cables.
When the cooling time is going to finish or finished, an acoustic
signal alerts the user the process is near to complete.