View of Caster Keeper
Assembly attached to
the Head End of Liberty
Bed. Caster Keepers
come pre-assembled
in kit.
View of Pedal Lock Attached
to the Foot End of Liberty Bed.
ONE-STEP LOCKING MECHANISM INSTALLATION—MODEL LBTL7174
(KIT LBTL83200; INCLUDES PEDAL LOCK, CASTER KEEPERS,
FOUR NON-LOCKING CASTERS, AND HARDWARE)
1. Position the Locking Pedal Assembly (#2) so that the
mounting bracket is on top and the red pedal is facing
outward, away from the carriage.
2. Align the bracket holes with the pre-drilled crossbrace
holes.
3. From the outside, insert a
5
/
16
-18 x 2.50" Hex Head
Bolt (#3) through both bracket and crossbrace holes.
4. From the inside, secure the bolt to the assembly
using a
5
/
16
-18 Thin Nylock Nut (#4). Tighten with two
1
/
2
" wrenches. (If you already have a lock mechanism
system on your Liberty bed and are attaching a
second Pedal Lock you are done and can skip steps
5 - 8.)
5. Remove the two locking casters at the foot end of
the carriage and replace them with two non-locking
casters (#9) from your kit. Use the same Locking
Nuts to secure.
6. Remove the two locking casters at the head end of
the carriage. Discard the nuts and locking casters.
From the bottom, insert the stems from the last two
non-locking casters from your kit into the carriage
holes.
7. Position the pre-assembled Caster Keepers (bent
arm outward and toward the foot end) onto the
exposed ends of each caster stem. The brackets
should rest securely on the carriage cross brace.
Secure the brackets to the carriage using two new
7
/
16
-14 Thin Nylock Nuts from your kit.
NOTE: A Second Locking Mechanism can be
attached to the opposite side—
Order part # 999-0832-980SP.
GF Health Products, Inc. - www.grahamfield.com
Liberty Series Service Manual 999-0822-190G
LIBERTY SERIES
23
For Parts Call Medical Parts Source: 941-342-7725
