FOOTBOARD INSTALLATION
1.
The footboard may come with four
pre-installed inserts - if not already installed,
assemble the four inserts (#4) into the
outside of the footboard as shown at right.
2. Position a right (#2) and left (#3) mounting
bracket on the inside of the footboard with
tubes facing inward as shown below.
3. Align the bracket top holes with the
footboard top holes.
4. Insert a socket head cap screw (#5) through
each of the top holes and bottom holes and
screw into each insert. Tighten with the hex
key included in the kit.
5. At the foot deck end, slide the bracket tubes
into the main frame rail hollow ends.
6.
FOR 80” BEDS:
Slide the mounting tubes
in until the bracket tube hole aligns with the
first rail hole as shown at right.
7.
FOR 76” BEDS:
Slide the mounting tubes
in until the bracket tube hole aligns with the
second rail hole as shown at right.
NOTE: To order a new Footboard Panel
Mounting Kit, use part # 999-0822-000. Kit
includes right and left Mounting Brackets,
8 Socket Head Cap Screws, 4 Clevis Pins,
4 Hair Pin Clips, and 1 Hex Key. Headboard
and Footboard kits are sold separately.
FOOTBOARD
MOUNTING
FOR 80" BED
Inserts may be
pre-installed
DETAIL B
MOUNTING
FOR 76" BED
DETAIL A
MOUNTING POSITIONS
GF Health Products, Inc. - www.grahamfield.com
Liberty Series Service Manual 999-0822-190G
LIBERTY SERIES
10
For Parts Call Medical Parts Source: 941-342-7725
