GF FlowtraMag GF 2581, Operating Instructions Manual

Page: 17 / 28

17 2581 FlowtraMag
®
Meter
Read Loads the data from the connected device (sensor or transmitter) and updates the software’s display.
NOTE: This will overwrite any changes made in the GF Con fi g Tool App since the last Write .
Write Applies the data entered in the GF Con fi g Tool App to the connected device. Once you have entered the desired setting
changes in the software screens, press Write to load your new settings onto the connected device.
Save Stores the entire GF Con fi g Tool App settings con fi guration, as currently displayed in the application, to your mobile device.
(You will be asked to provide a con fi guration fi le name)
Load Loads a default con fi guration fi le from the factory.
Opens a previously saved settings con fi guration fi le. See Save function above.
NOTE: The fi le must be a GF Con fi g Tool App settings con fi guration fi le.
The software will verify whether the user-selected fi le is the correct type.
There are con fi guration fi les available for speci fi c body sizes containing default values from the factory.
Carefully review the Device Tag and Passkey con fi guration in the Information screen.
Device Tag identi fi es the sensor you are connecting to. Device Tag maximum length 20 characters.
Device Passkey is needed for connecting to the sensor. Device Passkey is a 6 digit number.
READ WRITE SAVE LOAD
Share and/or Save fi les Naming fi les
Create fi lename
The fi le will be saved at mobile/
tablet device under the Saved
Log Files
Then fi les can be sent by Email
with .csv fi le format
To delete saved fi les, slide to
the right and click trash can
App Con fi guration - Files
App Con fi guration - Sensor Setup