GF FlowtraMag GF 2581, Operating Instructions Manual

Page: 15 / 28

15 2581 FlowtraMag
®
Meter
App Con fi guration - Sensor Setup
iOS version
When the 2581 FlowtraMag is in operation,
when in close proximity to the 2581 FlowtraMag
(less than 20 ft), open the
GF Con fi g Tool App
to begin a search nearby devices and go thru the
pairing process. Click on connect next to device
you are pairing to.
1. Pair the device by entering the
device Code/Pin.
The default Passkey is the last
6 digits of the product serial
number.
2. Click Pair/OK
3. Make any adjustments to the
2581 FlowtraMag, if necessary,
by tapping the Hamburger Menu
(menu list) or Gear (edit settings).
Config Tool
Code/Pin
Hamburger
(Menu) Gear
(Settings)
Code/Pin
Hamburger
(Menu) Gear
(Settings)
(example shows Menu)
Android version
(Version 8 or newer)
When the 2581 FlowtraMag is in operation,
when in close proximity to the 2581 FlowtraMag
(less than 20 ft), open the
GF Con fi g Tool App
to begin a search nearby devices and go thru the
pairing process. Click on connect next to device
you are pairing to.
1. Pair the device by entering the
device Code/Pin.
The default Passkey is the
last 6 digits of the product
serial number.
2. Click Pair/OK
3. Make any adjustments to the
2581 FlowtraMag, if necessary,
by tapping the Hamburger Menu
(menu list) or Gear (edit settings).
(example shows Menu)
Note:
If the GF Con fi g Tool password has been lost or forgotten, connect
blue wire to white wire while unit is powered (for 2 to 5 seconds.)
Password will reset to factory original (last 6 digits of serial number.)
082289
• • • • •
9
ory original (last 6 digits of
Config Tool