18
Hydraulic pumps manufactured by Cembre S.p.A. are developed for use with hydraulic
heads. According to this specific use, they do not need and are not equipped with an
oil non-return safety system. For this reason, use in applications different from those
intended (for example with hydraulic jacks, lifting systems or similar) can be dangerous
for the operator.
Cembre S.p.A. does not accept any liability arising from the use of its hydraulics pumps
for applications different from those listed in its catalogues or other documentation.
Do not use the pump for purposes other than those intended by Cembre S.p.A..
The operator should concentrate on the work being performed and be careful to maintain
a balanced working position.
Avoid dirty surfaces: dust and sand are a danger to any Electro-hydraulic equipment.
Protect the pump and accessories from rain and moisture. Water will damage the pump
and battery.
Never connect to a pump hydraulic tools that still contain oil, namely with the ram not
fully retracted; excess oil could cause the pump to malfunction.
Before disconnecting the flexible hose, check that the ram of the tools is completely retracted,
in order to ensure that a sufficient quantity of oil is available for subsequent operations.
Keep the pump and flexible hose away from naked flames and sources of heat above 70°C.
Flexible hoses are subject to a natural ageing process which can result in a reduction
in performance potentially affecting safety of the operator. As a result their life span
is limited.
In order to ensure safe use of their device, Cembre recommends replacing the hose within
10 years from the date printed on the fittings.
Before using the pump always check the integrity of the flexible hose and the quick
couplers making sure there are no abrasions, cuts, deformations or swellings.
Do not touch the flexible hose when under pressure.
When using the pump, the flexible hose must be uncoiled and laid out straight.
The pump is unsuitable for continuous use and should be allowed to cool down following
uninterrupted, successive working operations; for instance, having exhausted a fully
charged battery in one session, delay battery replacement for a few minutes.
ENGLISH
WARNINGS
