www.geyserwise.co.za
23
PV System Installers Guide
______________
Installation of the element
www.geyserwise.co.za
Ensure that you insert the
geyser temperature probe into the
correct pocket.
Insert the new geyser temperature
probe and connect the live wires once
again on the connector terminal block.
The blue and white wires on the AC/DC
element is the DC connection. The white
wire is connected to the negative of the PV
panel in case a solid state relay is used or
the negative of the MPPT in case a MPPT
controller is used. The blue wire is
connected to the negative of the load side
of the solid state relay in case a MPPT
controller is used or the negative of the
MPPT controller in case the MPPT controller
is used. Please see diagrammes on page 5.
3
4
5
Push the plug connected to the
geyser temperature probe through
the hole as provided on the geyser.
Plug it into the dedicated plug as
provided on the control unit.
6
Black and red = 230V AC
Blue and white = DC
8
GeyerWise Dual Controller
Instruction
manual
Plug the DC part of the element
into the MPPT Connector Cable
as supplied
5
6
Plug the DC part of the element
into the MPPT Connector Cable
as supplied
7
8
Insert DC thermostat into the
thermostat pocket before inserting
the AC thermostat. The DC thermostat
is connected to the control wire that
links the MPPT to the TSE1.
Insert the AC thermostat after the
DC thermostat into the thermostat
3
5
4
6
Summary of Contents for 100L geyser
Page 39: ...www geyserwise co za 37 PV System Installers Guide ___________________________________ NOTES...
Page 40: ...www geyserwise co za 38 PV System Installers Guide ___________________________________ NOTES...
Page 41: ...www geyserwise co za 39 PV System Installers Guide ___________________________________ NOTES...
