www.geyserwise.co.za
19
Flange Type Elements
Tools needed:
Phillips screwdriver
Socket wrench
Your new element
Garden hose
Volt meter or circuit tester (to make sure power if off )
Be sure to use the same wattage, voltage, and flange style as your previous element.
1
Shut OFF electric power to water heater. See safety steps on page 12
2
Shut OFF cold water supply to the geyser, open the hot water faucet, attach a hose to the drain valve,
open the drain valve on the GEYSER and drain the water.
3
Remove access cover and fold back insulation.
4
Check wires with a Multi Meter before attempting to
remove the wires.
5
Disconnect electric wires from element
White DC
Blue DC
Black AC
Red AC
PTC Element
PV System Installers Guide
______________
Installation of the element
14
Connect electric wires to element. Tighten screws.
15
Replace plastic terminal protector.
16
Replace insulation and access cover. Tank must be properly filled with water and free of air before applying
electric power to prevent element damage.
Summary of Contents for 100L geyser
Page 39: ...www geyserwise co za 37 PV System Installers Guide ___________________________________ NOTES...
Page 40: ...www geyserwise co za 38 PV System Installers Guide ___________________________________ NOTES...
Page 41: ...www geyserwise co za 39 PV System Installers Guide ___________________________________ NOTES...
