www.geyserwise.co.za
36
•
The MPPT must be mounted in a vertical
position against a solid surface
• Do not install the MPPT near water and
damp areas
• Do not install in direct sunlight
• Ensure the cables are PV solar flex cable of
adequate thickness
Double check all connections before
connecting the 30A fuse or switching on the
circuit breaker. Also check all AC connections
before switching on the isolator switch and
power at the DB board.
To
G
eyserW
ise T
SE
To PV Panels
To element
PV System Installers Guide
___________
Connection of MPPT controller
Connection of MPPT
Use the key supplied to adjust the voltages on the MPPT
Expected multi-meter Readings
DC Voltage from PV Panels
DC Current Amps to Element
DC Current Amps to Element PV
Once the AC and DC is connected, the
MPPT screen should show all the relevant
readings. Voltage in from Panels, Voltage
and current out to element and the power
produced.
The green LED light indicates that the
MPPT is switched on and busy tracking.
Summary of Contents for 100L geyser
Page 39: ...www geyserwise co za 37 PV System Installers Guide ___________________________________ NOTES...
Page 40: ...www geyserwise co za 38 PV System Installers Guide ___________________________________ NOTES...
Page 41: ...www geyserwise co za 39 PV System Installers Guide ___________________________________ NOTES...
