65
Charging process
Gewiss
#
Action needed
RGB LED status
Words on the display
1
Swipe the MASTER key across the RFID reader to access the
storage menu
Fixed green
*SAVING*
SWIPE THE CARDS
2
Swipe the MASTER key across the RFID reader until you reach the
required section
Fixed green
*DELETION*
SWIPE THE CARDS
3
Swipe the RFID card that you want to delete across the reader
Fixed green
RECOGNITION
*PLEASE WAIT*
4
To quit the RIFD card storage menu, swipe the MASTER key across
the RFID reader until the standard message appears
Fixed green
SWIPE THE CARD
TO RECHARGE
To run a recharging session:
#
Action needed
RGB LED status
Words on the display
1
Check the display to make sure there are no charging station errors
Fixed green
SWIPE THE CARD
TO RECHARGE
2
Swipe an RFID card across the reader, near the graphic symbol
Fixed green
CARD ENABLED
*PLEASE WAIT*
3
If the card is recognised (i.e. it is in the local list), the station will
release both type 2 socket-outlets and the client can choose the one
he/she prefers
Flashing green
CARD ENABLED
CONNECT THE CABLE
4
Insert the recharging plug in the required socket-outlet of the station,
and in the vehicle
Flashing green
CARD ENABLED
CONNECT THE CABLE
5
Once the connection has been made, the station checks the CP and
PP signals to make sure the session can be started
Fixed green
PLEASE WAIT
6
Once the CP and PP signals have been checked, the station locks the
plug electrically and mechanically in the socket-outlet. The recharging
session begins
Flashing blue
RECHARGE IN PROGRESS
Ts=0000 Tc=0000
RECHARGE IN PROGRESS
kW=0000 kWh=0000
7
The car is requesting energy from the station
Fixed blue
RECHARGE IN PROGRESS
Ts=0000 Tc=0000
RECHARGE IN PROGRESS
kW=0000 kWh=0000
8
Recharge in progress
Fixed blue
RECHARGE IN PROGRESS
Ts=0000 Tc=0000
RECHARGE IN PROGRESS
kW=0000 kWh=0000
9
To end the session, swipe the same RFID card used to begin it. In this
case, the station ends the session by releasing the plug in the type 2
socket-outlet
From fixed or flashing blue
to flashing green
CARD ENABLED
*PLEASE WAIT*
10
Remove the plug from the socket-outlet on the station
From flashing green
to fixed green
RECHARGE TERMINATED
REMOVE THE CABLE
SESSION SUMMARY
Ts=0000 Tc=0000
SESSION SUMMARY
kW=0000 kWh=0000
11
If the station encounters no errors, it returns to standby status
Fixed green
SWIPE THE CARD
TO RECHARGE
7.55.4.502.0 - Installation and Operation Manual
IT
EN
FR
ES
DE
RO
HU
NL
