12.2.1.1.1
P
ARAMETERS AND
D
ESCRIPTION
Equalizer - Parameters per Band
Parameter
Value Range/Unit
Low Band
Mid Band 2
Mid Band 1
High Band
Shelving
---
●
---
---
●
Q Factor
0,1
–
8,0
---
●
●
---
Frequency
20 Hz -16 kHz
●
●
●
●
Gain
-15 dB
–
+15 dB
●
●
●
●
Equalizer
–
Description of Parameters
Parameter
Description
Shelving
Attenuates or boosts frequencies above (High Band) or below (Low Band) a speci-
fied Shelf
Frequency
by the
Gain
Value
.
Q Factor
Determines the band width or precision of the filter. Set the curvature around the
edit point and consequently the width for neighboring frequencies to be affected.
Low values result in sharp curvature and high values cause smoother transitions
between the edit points and a broader spread of the spectrum affected by
Gain
.
Frequency
The frequency (mean) affected by the gain parameter. Regarding Shelving, this is
the turning point in curvature.
Gain
Boosts or attenuates the set band
Frequency
(mean) by the amount of
Gain
dB
adjusted. Neighboring frequencies get affected by the dB value of the Filter curve
at this frequency.
12.2.1.1.2
E
DITING
EQ
C
URVES
Proceed as follows:
1.
Turn Equalizer
[on]
.
2.
Tap the
[Equalizer]
field which contains the editing curve.
A dialogue pops up giving you access to the EQ Parameters which modify the
Curve
Points
.
Equalizer
3.
(Optional) Select a preset as starting point by tapping the
[Preset]
field.
Chose a preset by double tapping (alternatively: tap once on the preset name followed
by a tap on
[Load]
).
4.
Determine the frequency band that is closest to the disturbing frequencies in the audio
mix.
Custom Setting
on
off
Summary of Contents for G9
