Gewa G9, Owner'S Manual

Page: 89 / 180

Color Scales for Peak Detection by UI Theme
MIDI Velocity Value
UI Theme
GEWA Red
GEWA Classic
GEWA White
Tritanopia
Protanopia
Deuteranopia
Grayscale
Peak (126-127)
Normal High (125)
Normal Low (1)
11.1.1.2 A
UTO
S
ELECT
With Auto Select it is possible to select an input channel by playing the connected pad on one of its
components. Turning this feature
[on] will add the play-to-select feature to the standard select-by-
tapping function on the screen. It is recommended to use this feature sparingly, since it can cause
confusion when touching other pads accidentally.
11.1.1.3 P
EAK
D
ETECTION
With this function you can reset the peak monitor of the active module to the color value assigned
to the velocity level of 0. This is especially important to check if altered trigger parameters work as
desired. Tapping
[Reset] refreshes the Peak Monitor and deletes the detection history.
11.2 M
ODULE
2
11.2.1 T
RIGGER
S
ELECTION
11.2.1.1 S
ETUP
A collection of trigger banks can be grouped under a setup, which contains all trigger banks as-
signed to the input channels available. As a result, you can load all trigger banks at the same time
by just loading the setup. This is especially useful when experimenting with trigger bank parameters
of various pads. This way you can save a setup and switch back and forth between different setups
for comparison of the trigger behavior. As in
Effects Mode it is not mandatory to save edits in pa-
rameter values (module 3) as a Trigger Bank (module 2). The direct storage feature is also available