Problem Cause
Remedy
Motion detector switches
• Field of detection setting
• Adjust field of detection
the light on too late
• Movement from the front
by turning the sensor
Motion detector fails to
• Motion detector is mounted too low
• Mount higher
achieve maximum range
• Difference in temperature between heat source and
surroundings is not big enough
Motion detector switches
• Constant thermal movement:
light on constantly
There are areas within detection range that are
or when not necessary
not supposed to be monitored, e.g. footpaths, roads,
trees etc. Unexpected changes in heat sources
caused by storms, rain or fans.
The influence of direct / indirect sunlight.
Fails to react to vehicles
• Vehicle has not warmed up
• Engine area is very well insulated
Troubleshooting – Practical tips
7
Subject to technical and design changes without prior notice.
Technical data
Field of detection
180°
Range
freely adjustable from approx. 3 to 12 m
Time adjustment
freely adjustable from approx. 10 secs. to 15 mins
Twilight switch
freely adjustable from approx. 5 to 1,000 Lux
Mains connection
12 V = to 24 V
Switching capacity
60 W (12 V/DC) / max. 120 W (24 V/DC)
Protection type
IP 44
Protection Class
II
Recommended fitting height
2.5 m
DE
GB
FR
IT
PL
