57
Servicing the equipment and
installing spare parts
You may exchange the following component parts
in case of wear or damage:
The material specification and stock code
numbers of the component parts are
indicated in the supplied parts list.
Disassemble the equipment as described from
page 26 onwards.
Remove the defective component part from the
equipment.
Attention!
Equipment may leak if the gaskets are
damaged.
Always insert new main gaskets when
assembling the equipment.
Check all gaskets, seals and packing
rings before installing them.
Replace any damaged gasket, seal or
packing ring.
Mount the new component part.
Check all component parts before re-installing
them.
Replace the defective component parts.
Replace the two main gaskets.
Re-assemble the equipment as described in
section "
" from
page 40 onwards.
