26
Disassembling the equipment
You have to disassemble the equipment if you want
to
rinse the pipes and the equipment
service component parts
replace or exchange component parts.
If you exchange component parts you can
use the equipment for different application
conditions.
For this purpose you do not have to
remove the equipment from the
installation.
Ask the manufacturer for information on
possible retrofitting modifications for your
equipment.
CAUTION
Sharp edges on component parts can
cause cuts.
Wear industrial gloves when servicing
equipment parts.
Preparing the equipment for disassembly
DANGER
Personnel working on pipes are exposed to
safety risks and may suffer severe injuries,
poisoning or even loss of life.
Make sure that no hot or hazardous
fluid is in the equipment or the pipes.
Make sure that the pipes upstream
and downstream of the equipment are
depressurised.
Make sure that the installation is
switched off and protected against
unauthorised or unintended activation.
Make sure that the equipment and the
pipes have cooled down to room
temperatures.
Wear protective clothing that is
suitable for the fluid and, if necessary,
wear protective gear.
For more information on suitable protective clothing
and safety gear refer to the safety data sheet of the
fluid in question.
Shut off the pipes upstream and downstream of
the equipment.
