27
DANGER
Risk of bruises if the equipment or
component parts fall down.
Always wear protective gear when
working on the equipment.
Use suitable lifting gear when moving
or lifting the equipment and/or
component parts.
Make sure that the equipment cannot
topple over.
To lift the equipment use only the
valve body or the bonnet.
Make sure that nobody is standing
below the lifted equipment.
The protective gear must comprise at least the
following:
Safety helmet to EN 397
Safety footwear to EN ISO 20345
Protective leather gloves to EN 388
For more information on suitable safety clothing and
safety gear refer to the safety data sheet of the fluid
in question.
The lifting gear must be of sufficient strength for
the equipment including the actuator.
For more information on the weight of the
equipment see the attached documents. For more
information on the weight of the actuator see the
documents provided by the actuator manufacturer.
Connect the lifting gear to the equipment or part
that you want to lift.
For this purpose use a noose strap of sufficiently
sturdy material.
Attach the noose strap to the lifting points or a
flange.
The space required for disassembling and
re-assembling the equipment depends on
the optional extras and the type of
actuator.
For more information on the required
service space see the attached drawings.
Attention!
The equipment or component parts may be
damaged if it is disassembled or re-
assembled in the wrong order.
Always follow the sequence of
activities described in the following
sections.
Attention!
Equipment may be damaged if unsuitable
tools are used.
When working on the equipment use
only the tools specified in the attached
tools list.
