Attention!
If the equipment is used after sudden
and/or drastic temperature changes
condensation may form in the equipment.
This can lead to malfunctions or damage.
After temperature changes leave the
equipment switched off until the
temperature of the equipment reaches
ambient temperature.
Do not recharge the equipment during
this time.
13
Attention!
Risk of data loss if the equipment is not
fully charged.
Before using the equipment make
sure all components are fully charged.
Recharge the equipment as soon as
possible if the state-of-charge
indicator on the display is yellow.
Recharge the equipment immediately
if the state-of-charge indicator on the
display is red.
Before using the equipment for the first time you
have to charge the batteries in the Com box and in
the data collector.
Charge the battery of the Com box as described
on page 29.
Charge the battery of the data collector as
described in the operating manual for the data
collector.
If the temperature of the battery is too high
or too low the charging process of the data
collector and the Com Box is stopped
automatically to prevent the batteries from
overloading.
The max. temperature is 35 °C (95 °F),
the min. temperature 0 °C (32 °F).
The charging process will continue
automatically as soon as the temperature
of the battery is again within the
admissible temperature limits.
