28
After operation
Switching the equipment off
To switch the Com box off press the button
ON/OFF (7) and hold it down for three seconds.
The blue LED (9) is flashing rapidly as long as the
button is depressed. After three seconds the Com
box is switched off. All LEDs are off.
7
8
9
To switch the data collector off press and hold
down the ON/OFF button on the data collector
for three seconds.
A beep sound is emitted and the data collector is
switched off.
If the data collector has been set to mute
no beep sound can be heard when the
data collector is switched off. For more
information see the operating instructions
for the data collector.
Maintaining the equipment
The equipment does not require any particular
maintenance.
Removing external dirt deposits
Attention!
If fluids penetrate the equipment it may get
damaged.
Make sure that fluids cannot get into
the equipment.
Use only a slightly moistened cloth to
clean the equipment.
To remove dirt deposits rinse the equipment
with fresh water and wipe it with a clean, lint-
free cloth.
To remove any persistent residues use a
cleaning agent that is suitable for the material
and carefully wipe the equipment with a clean,
lint-free cloth.
Checking the component parts for damage
Be sure that all components are in good working
condition before and after using them.
Do not use damaged or defective components.
Replace any damaged or defective component.
