36
CHAPTER 5
Printing Jobs
5
Press the DOWN arrow to scroll through the foils required for the job. An example of a
typical display is:
Foils needed this job: (2 of 4)
Process magenta GCP-773
40 in. loaded, Bay 2
48 in. required – load more
6
In this case, there is not enough Process Magenta foil to complete the job. You can
either pause the printer now and load the foil, or press RUN to continue the job. If you
let the job continue, when the process magenta foil color reaches the low foil threshold
value the MAXX 2 pauses and displays:
Foil Low, Bay 2
or
Foil Very Low, Bay 2
7
Press RUN to continue printing, or replace the foil in the cassette and then press RUN.
To view the material information for the job
1
From the Main menu press
< Job Queue
. The display is:
Job Queue (n)
< 1 Job name
< 2 Job name
< 4 Job name
2
Press the function key next to a job. This display is:
< View Job Details
< Change Queue Position
(not displayed for a replay job or when there is only one job in the queue)
< Remove Job From Queue
(not displayed for a replay job)
3 Press the function key for
< View Job Details
. The display is:
Queue #: 2 Job Id: 17
Job Description
< Process yellow GCP-706
(if you press this function key, you get a list of all the foils in the job)
< Vinyl: White 225 Custom
4
Press the function key for the vinyl. An example of the display is:
Job Vinyl Information
Expected Roll Size 36.0 inches
Job Width (y)
14.7 inches
Job Length (x)
155.7 inches
5
To exit any of these displays, press CANCEL.
Tip: When printing in the run continuous mode, try to group jobs by material and foil colors,
then make sure that the foil colors for all jobs are loaded in the cassette rack. This allows the
MAXX 2 to print all the jobs in an unattended mode without pausing. To check the list of foils
loaded in the cassette rack, check Bay Status as described in “Determining the status of
each bay” on page 33.
Summary of Contents for 2
Page 1: ...GERBER MAXX 2 Owner s Guide ...
Page 2: ......
