18
CHAPTER 3
Understanding the MAXX 2 Control Panel
Re-positioning a job in the queue
When you change the position of a job in the queue, other jobs are shifted up or down in the
queue as needed. Re-positioning is not available for the replay job or when there are less than
two jobs are in the queue. It is not possible to change the queue position when the job at the
original or new queue position has already begun to print.
To change the position of a job in the queue
1
Press the function key next to a job. This display is:
< View Job Details
< Change Queue Position
(not displayed for a replay job or when there is only one job in the queue)
< Remove Job From Queue
(not displayed for a replay job)
2
Press the function key for
< Change Queue Position
. The display is:
Job B Description
Move From Entry 2 to: 3
Press UP/DN To Adjust
ENTER to save, CANCEL to quit
3
Press UP or DOWN to move the job to a new queue position.
4
Press ENTER to save the new position.
Deleting jobs from the queue
You can delete a job from the queue by using the Remove Job From Queue command. Deleting
a job is not available for the replay job or if a job has already begun to print.
When you select Remove Job From Queue, you must respond to a confirmation message before
the job is marked for deletion. (When viewing the Job Queue from GQ Manager, jobs removed
from the queue are marked as aborted.) Even though a deleted job no longer appears in the
queue on the MAXX 2 display, the job is not removed from the queue until it reaches the first
queue position. Deleted jobs that still reside in the MAXX queue occupy one of the 32 available
queue positions. To immediately remove a job from the queue, move the job to the first queue
position and then delete it.
To delete a job from the queue
1
Press the function key next to a job. This display is:
< View Job Details
< Change Queue Position
(not displayed for a replay job or when there is only one job in the queue)
< Remove Job From Queue
(not displayed for a replay job)
2
Press the function key for
< Remove Job From Queue
. The display is:
Queue #: 2 Job Id: 17
Job B Description
Remove this job from queue?
Press ENTER if “yes”, CANCEL if “no”
3
Press ENTER to delete the job.
Summary of Contents for 2
Page 1: ...GERBER MAXX 2 Owner s Guide ...
Page 2: ......
