17
As a new job is printed, it replaces the previous replay job in memory. You can not delete a
replay (
R
) job from the Job Queue.
When in run continuous mode, the replay job is automatically replaced when a new job is
started. At the end of a RUN CONTINUOUS sequence, the last job printed is the replay job.
Note: Any incompletely printed or unprinted jobs in the queue are retained at power-down.
This feature ensures that you will not lose work in the event of a power loss. For partially
printed jobs, the entire job can be reprinted.
To display the job queue
1
Press MENU on the control panel. The display is:
< Bay Status
< Job Queue
< Setup
< Service
2
Press the function key for
< Job Queue
. The display for a Job Queue with five jobs is
shown below. Your display will vary based the number of jobs in the queue.
Job Queue (5)
< R Replay Job Description
< Job A Description
< Job B Description
3
Press DOWN or UP to scroll through the queue.
Displaying detailed information about each queued job
Press the function key adjacent to any job listed in the queue and choose View Job Details to
display the job information. This display shows the queue position, the job identification
number (which is assigned by GQMgr), the job (file) name, the first foil that prints, and the
substrate name. If you press the function key for the foil, you get a list of all foils in the job.
To display detailed job information
1
Press the function key next to a job. This display is:
< View Job Details
< Change Queue Position
(not displayed for a replay job or when there is only one job in the queue)
< Remove Job From Queue
(not displayed for a replay job)
2
Press the function key for
< View Job Details
. The display is:
Queue #: 2 Job Id: 17
Job B Description
< Process – Black GCP-712
(if you press this function key, you get a list of all the foils in the job)
< Vinyl: White 225 Custom
3
Press CANCEL to return to the Job Queue.
Summary of Contents for 2
Page 1: ...GERBER MAXX 2 Owner s Guide ...
Page 2: ......
