Gerber Technology GERBERplotter MP Series, User Manual

Page: 67 / 184

57
GERBERplotter MP Series User Manual
English
4.1 Introduction
After you install Server Manager and User Manager, update WinPlot or AccuMark to use the GERBERplotter MP
Series.
4.2 Installation Requirements
This installation requires:
Microsoft Internet Explorer version 7 or later
AccuMark or WinPlot version 8.4.0 or later be installed
Before you update WinPlot or AccuMark:
Get the USB drive that came with the plotter (Box 3, CN319).
Install User Manager and Server Manager software.
Plug in and turn on all GERBERplotter MP Series plotters.
Make sure all GERBERplotter MP Series plotters are correctly set up in User Manager and Server Manager soft
-
ware.
Log on to the computer that has WinPlot or AccuMark using an administrator account.
4.3 Installing the Software Update
To install the update, you need the USB drive that was included with the GERBERplotter MP Series and from which
you installed User Manager and Server Manager.
1
Plug the USB drive into a USB port on the computer.
2
Sample Install.htm open in a browser
3
Click the GerberMPplotter Update link.
If install.htm does not open in a browser automatically:
a) Use Windows Explorer to open the root path of the USB drive.
b) Right-click install.htm, select Open with, and choose Internet Explorer. The installation Web page opens.
The install.htm page might look slightly different than the
one shown here, depending on the version of software you
are using.