Gerber Technology GERBERplotter MP Series, User Manual

Page: 171 / 184

161
GERBERplotter MP Series User Manual
English
7.2.5
Restoring the configuration
Restoring the configuration of a plotter is done in a similar way to updating the firmware. In the Printer Manager
dialog box, select a previously generated file (see the previous section) that is used to transfer the configuration file
to the plotter. This restores the plotter settings (such as information and calibration data).
1
Make a copy of the security configuration (see section 7.2.4 Configuration backup).
2
Disconnect the plotter and replace the main board.
3
Restore the configurations from the copy made in the first step (see section 7.2.5 Restoring the configuration).
If the configuration of the new main board is incorrect, the plotter warns you that the main board is
not suitable. If this happens, contact your Gerber Representative to resolve the problem.
7.2.6 Replacing the main board
To replace the main board of a plotter: