Introduction
13
1
D. Secure the camera cover with the 3 mm hex key. Make sure the first two screws to
be tightened are diagonal to each other.
2. Assemble the supplied mounting bracket, tube and mounting cap by rotating the parts
together.
Figure 1-8
3. Make sure the tubes are properly screwed. Tighten the screws using the 2 mm hex key.
Figure 1-9
4. Connect the cables to the camera.
A. At the back of the camera, remove the cap and use the 3 mm hex key to remove the
mounting plate.
Figure 1-10
