116
5.4 PTZ Settings- Sequence Settings
You can have the camera view move in a series of predefined movements, called a Sequence.
Create a Sequence by linking a number of presets points. Up to 8 Sequences can be created
and a minimum of 2 preset points must be selected for a Sequence route to work.
Figure 5-4
Setting Up a Sequence
1. From the PTZ control panel (Figure 5-1), click
Option
, select
Setup
, and click
Open
to
display the
PTZ Configuration
dialog box, click
Sequence
located under
PTZ Setting
on
the left menu.
2. Use the
Index
drop-down list to select the Sequence group number to be configured. Up
to 8 Indexes (Sequence groups) can be created.
3. One Sequence group can include up to 16 Preset Points. Use the
Point
drop-down list to
select the number of Preset Points allowed in this Sequence group.
4. Use the
Preset
drop-down list to select the Presets for this Sequence group.
5. Use the
Dwell Time
drop-down list to set the duration for the dome to stay at this Preset.
The duration time ranges from 1 to 255 seconds.
6. Use the
Speed
drop-down list to set the speed at which the dome travels from one Preset
to another.
7. To create another Sequence group, select a different Index number and repeat Steps 3 to
4.
8. Click
Save
to complete the settings.
