GeoVision GV-PPTZ7300 Page 117 User Manual Download

Page: 117 / 187

Administrator Mode

105

4.8.3 User Account

Note:

This setting page is only available on the fisheye interface. Any changes made will

be applied to the speed dome as well.

You can change the login name and password of Administrator, Guest and FTP Server User.

•

The default Administrator login name and password are

admin

•

The default Guest login name and password are

guest

. To allow a Guest user to log in

without entering name and password, select

Disable authentication for guest account

•

To remain logged in after reboot, select

Disable auto logout after reboot

•

The default FTP Server login name is

ftpuser

and default password is

123456

Figure 4-32

Summary of Contents for GV-PPTZ7300




























































































































































































Search results

Summary of Contents for GV-PPTZ7300

Reviews:

Related manuals for GV-PPTZ7300

Brands by name

Popular brands

GeoVision GV-PPTZ7300, User Manual

Search results

Summary of Contents for GV-PPTZ7300

Reviews:

Related manuals for GV-PPTZ7300

Brands by name

Popular brands