Bullet Camera
7
B.
Slightly pull out the camera module.
C.
Insert a micro SD card (SD/SDHC, version 2.0 only, Class 10)
into the memory card slot.
Memory Card Slot
D.
Push the camera module back and fasten the fixing screw.
5.
Insert a new silica gel bag to the camera module.
IMPORTANT:
1. The silica gel bag loses it effectiveness when the dry camera is
opened. To prevent the lens from fogging up, replace the silica gel
bag every time you open the camera, and conceal the gel bag in
camera within 2 minutes of exposing to open air.
2. For each newly replaced silica gel bag, allow it to absorb moisture for
at least 5 hours before operating the camera.
61
Summary of Contents for GV-CBW120
