Accessing the Camera
3
(Normal)
for a balanced effect. Select
Close
to disable the function. This function is not
available for GV-FER12203.
Defog:
Select
Auto
to automatically enhance the visibility of images. Select
Close
to
disable the function. This function is not available for GV-FER12203.
Metering:
Controls the camera’s exposure. Select
Normal
for the camera to adjust
exposure based on the full live view. Select
Regional Metering
for the camera to adjust
exposure of specified zones. Draw directly on the live view and a block marked with “AE
(automatic exposure)” appears. You can establish up to 4 zones. To remove the block,
right-click the block and select
Delete
.
Low Lux Enhancement:
Select
Auto
for the camera to automatically enhance the live
view under insufficient light. Select
Close
to disable the function. The default setting is
Close
. This function is only available for GV-FER5700 / 5701 / 12203 / 12700 /
EFER3700 / EFER3700-W.
IR Light:
Select
Auto
for automatic switch between day mode and night mode
depending on the amount of light detected. Select
Off
to completely disable IR LEDs.
Maximum IR Strength:
Adjusts the intensity of the IR Light.
Denoise:
Reduces image noise especially under low-light conditions. The higher the
denoise value, the stronger the effect.
[Temperature]
Click the
Monitor
button to see the current temperature of the chipset in
Celsius and Fahrenheit.
[Download]
Allows you to install the programs from the hard drive.
Note:
The I/O Control function is only supported by GV-FE2301 / 4301, GV-FER5700 /
5701 / 12203 / 12700 and GV-EFER3700 / EFER3700-W.
77