manualshive.com logo in svg

GeoVision EFER3700-W, User Manual, Page: 142 / 209

Share
Download
GeoVision EFER3700-W User Manual Download Page 142

 

4.5.2  I/O Monitoring Settings 

You can set the schedule for I/O monitoring to start. 

Note:

 The I/O Monitoring Settings are only supported for GV-FE2301 / 4301, GV-

FER5700 / 5701 / 12203 / 12700 and GV-EFER3700 Series.

 

 

 

                                         

     

   Figure 4-25 

 

 

Span 1-3: 

 Set different time spans during the day to enable I/O monitoring. Each day 

can be divided into 3 time spans, shown as Span 1, Span 2, and Span 3. The time 

span settings will work from Monday through Sunday.  

 

Weekend:

 Enable this option to start I/O monitoring all day on the weekend and select 

whether your weekend includes 

Saturday and Sunday

 or 

Only Sunday

. 

 

Special Day:

 Enable I/O monitoring on a specified day. 

Note:

 In Recording Schedule and I/O Monitoring Schedule, if the settings for Special 

Day conflict with those for Span 1-3 or Weekend, the Special Day settings will get 
priority.

 

 

 

128 

Summary of Contents for EFER3700-W


















































































































































































































Reviews:

No comments