Introduction
1
1.6.1.2 GV-FER5700 / 5701 / 12203 / 12700
1. Paste the installation sticker to the ceiling board.
2. At the 3 dots, drill a hole slightly smaller than the plastic screw anchors provided.
Figure 1-16
3. Insert the 3 plastic screw anchors in the drilled holes.
4. Secure the back plate onto the ceiling board with the 3 screws provided. If you want to
thread the camera cables through the ceiling board, you can cut a cable opening as
shown below.
Figure 1-17 –
users are provided with one of the back plates shown above with the standard package
31