[LED Control]
Select
Disable
if you do not want to use the System Status LED (No. 8,
Figure 1-2).
[Enable SDK]
Select
Enable
to activate SDK. This function is not available for
GV-FER5700
/ 5701 / 12203 / 12700 and GV-EFER3700 Series
.
[Special View Setting]
D/N:
Sets the Day/Night mode of the camera.
Auto:
Select
Auto
for the camera to detect the amount of light present and
automatically switch to monochrome in a poorly-lit scene. Use the drop-down list to
adjust the sensitivity level of light sensor from 1 to 10. The higher the value, the more
sensitive the camera is to light.
Black and White:
Select this option for the live view to be in monochrome.
Color:
Select this option for the live view to be in color.
Triggered by Input
: Select this option to switch between day mode and night mode
once the input device (e.g. sensor or button) is triggered.
Note:
If you select
Triggered by Input
, make sure you enable
Trigger Day/Night Mode
in
4.2.1 Input Settings
.
Schedule:
For GV-FER12201 firmware V1.02 or later, select this option to determine
specific period(s) of time when day mode is activated. See
4.5 Recording Schedule
Settings
for the details on the setting of the schedule.
Note:
If you select
Schedule
, make sure you start
Schedule
monitoring in
4.4 Monitoring
.
[BLC]
Enable backlight compensation to adjust the exposure when the subject is
positioned in front of a bright light source.
98