S53-053 Panther
3 of 53
1
General information
Description
This Panther is exclusively designed for CPT (related) operations. The CPT push frame allows to push-in or pull-
out CPT tubes with a diameter of 36 mm, as well as casing tubes with a diameter of 55 mm. The maximum
bore of the CPT push frame is 96 mm.
Terms and conditions
Geomil applies the terms and conditions of the Metaalunie to the delivered products. These are the standard
conditions of delivery and payment issued by the ‘Metaalunie’, referred to as the METAALUNIE CONDITIONS
and previously as the SMECOMA CONDITIONS, filed at the Registry of the District Court in Rotterdam on 1
January 2008. Terms and conditions are available upon request.
*Alteration to article 14 Warranty 14.1: Geomil warrants the proper execution of the agreed performance for
a period of two years after delivery or completion.
*Alteration to article 14 Warranty 14.2: If it transpires that the delivered construction or the materials used
are unsound, the contractor shall repair or replace them. The parts which the contractor is to repair or replace
must be sent to him free of charge. The dismantling and assembly of these parts and any travelling and
accommodation expenses incurred shall be borne by the customer. This does not apply to the delivered
construction or materials inside the Netherlands.
Warranty of quality
A warranty of two years applies on all by Geomil Equipment delivered materials, provided the maintenance of
the CPT push frame is conform to the maintenance schedule assigned to Geomil Equipment.
In case the equipment is located outside The Netherlands, the warranty applies exclusive of travel- and
accommodation expenses.
This warranty does not apply for the materials provided by the user, or for materials provided by third parties.
Normal wear and tear is also excluded from this warranty.
Training
Working with this crawler requires qualified personnel. Geomil recommends a two-person crew.
Geomil Equipment strongly recommends training and can provide and/or support such training.
Redistribution
When the owner redistributes/sells on the delivered equipment to third parties, the responsibility for the
equipment fully lies with the owner. Translation of any documents by the owner of the equipment also applies
to this rule. Translated documents must be marked with ‘translation’ (e.g. ‘ORIGINAL MANUAL’ ->
‘TRANSLATION OF THE ORIGINAL MANUAL’).
