S53-053 Panther
51 of 53
18.3.9
Fig 50 Z
- Mudwiper tube preparation
THIS DRAWING IS PROPERTY OF GEOMIL EQUIPMENT BV ( GME ). ANY DISCLOSURE, TRANSFER, USE AND/OR REPRODUCTION OF THIS DRAWING,
OR THE DESIGN HEREIN, WITHOUT EXPRESS WRITTEN CONSENT FROM GME IS PROHIBITED. ALL RIGHTS RESERVED.
FIG. 50 Z
1 MOVE PUSH FRAME UP AND PLACE THE ANTI LOCKING PLATE
2 OPEN THE CLAMP, MOVE THE PUSH FRAME DOWN AND PLACE A TUBE WITH THE
MUD WIPER STRETCHER THROUGH THE CLAMP AND IN THE SUPPORT TUBE
3 CLOSE THE CLAMP AND PUSH THE TUBE THROUGH THE MUD WIPER
4 MOVE PUSH FRAME UP AND REMOVE THE SUPPORT TUBE WITH THE TUBE
1
2
3
4
ATTENTION!
Make sure the tube is placed in the support tube, the
catch clamp is open and the tube is extended at least
5 cm above the clamp before closing the clamp
