S53-053 Panther
21 of 53
10
Driving the crawler
Always use the remote control to drive the crawler.
Make sure to keep a safe distance while driving the crawler (at least 1 m).
While driving the crawler it is prohibited for any person(s) to be present in
the work cabin.
In case anything goes wrong during driving:
Release all levers
Process is halted immediately
53 CW
1 and 2
Use the lever(s) to proceed
Lever(s) down: driving
backwards;
Lever(s) up: driving forwards
53 CW
1 and 2
Press the emergency
switch
Process is stopped
Immediately;
53 CW
5
Restart the system to
proceed
Refer to chapter 7
To drive the crawler, proceed as follows:
Step Condition
Information
Remark(s)
Fig.
Switch/item
1.
Check if the system is active
refer to chapter 8 -
-
2.
Check if the remote control is active
press and hold to
activate
53 CW
6
Activation light is lit
53 CW
3.
Check if the engine is running
Refer to chapter
9
-
-
4.
Increase the engine rpm’s
53 DM
7
Hare, rpm up;
Turtle, rpm down.
Maximum = 2200
Minimum = 800
Step Condition
Information
Remark(s)
Fig.
Switch/item
5.
Take the remote control
STEP OUT OF THE
CRAWLER
-
-
6.
Drive the crawler with both track levers
53 CW
1 and 2
If necessary, select “snail” for slow
driving
Switch down
53 CW
3,4
