54
In order for MTPro to export Edi files it must be at least version 3.0 The GTS file must have
been acquired in GeodeEM version 3.0 or greater. If the GTS file came from an older version it
can be opened in version 3.0 or greater and edited to add the correct offset.
AA. How to export the EDI files:
The EDI files can be created in MTPro either from .GTS files or saved .MT files. The export of the
EDI files is done as follows:
1) Read in the .GTS files or an .MT file into MTPro version 3.00 or greater. (Build date of May 11
or later)
2) Click “File”/”Export EDI file”. It will show you the EDI export menu as follows:
3) Make sure each EDI Data ID is unique for each station and the name length is 10 characters
or less. In the example above the EDI Data ID’s are not uniquire. Therefore they need to be
edited. The image below shows the edits to make each one unique for the sounding, and still be
10 characters or less.
